Glass Insulating Glass Butyl Tape Equipment Hot Melt Adhesive Film Coating Machine

1. This machine adopts microcomputer PLC, touch screen control, simple operation, and a high degree of automation; 2. Using wear-resistant alloy steel coating head, coating control accuracy and service life are greatly improved; 3. The overall translational coating adjustment bracket is adopted, and the repeat positioning accuracy is high; 4. With automatic tracking, display, and storage functions of glue volume, it is convenient and fast to operate and use; 5. The glue supply amount of the metering pump is automatically calculated by the coating width and glue amount input by the operator, and the glue supply amount can be modified according to the characteristic curve of the metering pump; 6. The surface coating adopts a sealed flexible stainless steel die head, which directly scrapes the coating on the surface of the substrate. The width and thickness of the scraping coating are adjustable; the control accuracy of the scraping coating layer is ensured, and the use is convenient and reliable. 7. The stocker adopts active control, the tension is automatically adjustable, and no counterweight is needed. 8. The tension of the whole machine adopts segmented low tension control to prevent the substrate from stretching and deformation.

The rubber head

The rubber head of Automatic butyl extruder machine is a floating soft connection, vertical movement, automatic guiding, uniform force around the rubber cylinder and the postion, and overcomes the defects of easy wear of the bottom of the horizontal rubber cylinder.

The Germany Siemens PLC system

The whole machine adopts the Germany Siemens PLC system, handle-machine interface operation, automatic and accurate glue application and multi-speed section adjustment, high production efficiency.

Automatic exhaust function

With the automatic exhaust function, the butyl rubber can be spread evenly when the equipment is glued, and no bubbles will be generated.

Adopt non-stick tape

Non-stick tape is used in the gluing section of the equipment to maintain fast gluing and avoid waste of 30% butyl glue in the gluing process.

Keep stable during the extrusion processing

The whole machine is divided into hydraulic system and gas-liquid system boosting work, ensure that the glue is extruded evenly and the glue is stable during the extrusion processing.

The German Harvey valve

The German Harvey valve is used to ensure more stable performance when the glue is suspended and starts to be glued.